Evaporation Capacity 1 ton Pressure 10 bar Fire Tube Industrial Oil Fired Steam Boiler
1, Introduction
This product adopts horizontal internal combustion wet-back four-return pyrotechnic tube structure, the combustion mode is: chamber type gas boiler; the flue gas system is forced positive pressure ventilation; the fuel type is mainly gas. This product is simple in structure and easy to manufacture. Open the smoke box to directly inspect the furnace and all the pipes, the structure is compact, and the boiler starts up quickly. The boiler basically has no smoke leakage, low heat loss, high thermal efficiency and fully automatic control.
2, Design basis and implementation standards
TSG G0001-2012 "Boiler Safety Technical Supervision Regulations"
TSG G0002-2010 "Boiler Energy Conservation Technology Supervision and Management Regulations"
JB/T1609-1993 "Technical Conditions for Boiler Tube Manufacturing"
GB/T16508-1996 "Body shell boiler pressure component calculation"
GB/T1576-2008 "Industrial Boiler Water Quality"
GB273-2009 "Boiler Installation Engineering Construction and Acceptance Specifications"
Other relevant specifications and standards.
3, Structure
1) The boiler cycle is a natural circulation circuit;
2) Boiler heating elements: The designed heating elements of the boiler are divided into corrugated furnace, flat furnace, furnace head, and convection tube bundle. The corrugated furnace, the flat furnace and the furnace head are radiation heating surfaces, and the convection tube bundle (threaded tobacco tube) is a convection heating surface. The shape of the corrugated furnace is φ600mm, the length is 1380mm, the diameter of the straight furnace is φ600mm, and the length is 450mm, which is the radiation heating area. The pipe convection tube bundle is: long pipe φ51×3mm, length 2815mm, number 26; thread pipe is φ51×3mm, length is 2030mm, number is 36, and both convection heating area.
3) The boiler is designed with a tail heating surface as a fire tube economizer, a threaded cigarette tube φ51×3mm, a length of 1200mm, and a number of 26.
4) Boiler combustion equipment: The boiler combustion equipment is an imported automatic burner.
4, Boiler design specifications:
Rated evaporation: 1 t / h
Rated working pressure: 1.0MPa
Feed water temperature: 20 ° C
Rated steam temperature: 184 ° C
The heating area of body : 30.5 m2
Economizer heating area: 4.4 m2
Boiler design thermal efficiency: 90.2%
Test pressure: 1.4 MPa
Design fuel: natural gas
Fuel consumption: gas: 85m / h
Exhaust gas temperature: 163 ° C
Maximum shipping weight: 5500kg
Maximum shipping size: 3.6 × 2.3 × 2.6m
The body consumption of the boiler is 3800kg, and the weight of the boiler steel frame is 550kg
Feed pump
Model: 25LG3-10X13
Flow rate: 2.4m3/h
Head: 135.2m
Power: 4kw
Burner
TBG85P
Thermal power 170-850KW
Pressure 420Pa
Power: 1.1 kw
5, Performance characteristics:
The 1ton gas fired steam boiler has increased the convective heating area based on the thermal calculation standard design, and meets or exceeds the rated output. The safe and stable operation condition of the boiler should be within 70%~100% load; the exhaust gas temperature is lower, the boiler efficient high.
Suitable furnace size, unfolded flame, adapt to a variety of gas burners.
The boiler has control and protection functions such as automatic ignition, program control, water level control, overpressure protection, and furnace flameout protection. It is easy to operate, safe and reliable.
6, applicable conditions:
Boiler feed water should meet GB/T1576-2008 "Industrial Boiler Water Quality"
Flue gas emissions comply with the environmental requirements of the first-class regions of the country.
Water supply hardness: 0.03mmol / L,
Oxygen content: 0.1mg / L,
Boiler water full alkalinity: 6 ~ 24mmol / L,
PH (25 ° C): 10 ~ 12.
Evaporation Capacity 1 ton Pressure 10 bar Fire Tube Industrial Oil Fired Steam Boiler
| | Rated | Rated working | Rated steam | Suitable | Feed water |
| Model | output | pressure | temperature | fuel kind | temperature |
| | (t/h) | (Mpa) | (ºC) | | (ºC) |
| WNS0.5-0.7/1.0/1.25-YQ | 0.5 | 0.7/1.0/1.25 | 170/184/194 | heavy oil/light oil,natural gas/lpg/city gas | 20 |
| WNS0.7-0.7/1.0/1.25-YQ | 0.7 | 0.7/1.0/1.25 | 170/184/194 | 20 |
| WNS0.8-0.7/1.0/1.25-YQ | 0.8 | 0.7/1.0/1.25 | 170/184/194 | 20 |
| WNS1-0.7/1.0/1.25-YQ | 1 | 0.7/1.0/1.25 | 170/184/194 | 20 |
| WNS1.5-0.7/1.0/1.25-YQ | 1.5 | 0.7/1.0/1.25 | 170/184/194 | 20 |
| WNS2-1.0/1.25/1.6-YQ | 2 | 1.0/1.25/1.6 | 184/194/204 | 20 |
| WNS3-1.0/1.25/1.6-YQ | 3 | 1.0/1.25/1.6 | 184/194/204 | 20 |
| WNS4-1.0/1.25/1.6-YQ | 4 | 1.0/1.25/1.6 | 184/194/204 | 20 |
| WNS5-1.0/1.25/1.6-YQ | 5 | 1.0/1.25/1.6 | 184/194/204 | 20 |
| WNS6-1.0/1.25/1.6-YQ | 6 | 1.0/1.25/1.6 | 184/194/204 | 20 |
| WNS8-1.25/1.6-YQ | 8 | 1.25/1.6 | 194/204 | 20 |
| WNS10-1.25/1.6-YQ | 10 | 1.25/1.6 | 194/204 | 20 |
| WNS12-1.25/1.6-YQ | 12 | 1.25/1.6 | 194/204 | 20 |
| WNS15-1.25/1.6-YQ | 15 | 1.25/1.6 | 194/204 | 20 |
| WNS20-1.25/1.6-YQ | 20 | 1.25/1.6 | 194/204 | 20 |
Product Tags:
|
|
1 Ton Dual Fuel Steam Boiler 10 Bar Shell Type Boiler Low Heat Loss Images
|
